安徽11选5走势图

销售咨询热线
15953126901
18615254757
安徽11选5走势图 hengye
企业案例 case

联系我们

  • 联系人:济南燕翔铁艺制品有限公司
  • 手机:15953126901
  • 电话:18615254757
  • 邮箱:785385551@qq.com
  • 地址:济南市天桥区历山北路黄台不锈钢市场9区904号
当前位置: 安徽11选5走势图 > 新闻资讯>安徽11选5走势图>铁艺大门装置前准备工作都有哪些?

铁艺大门装置前准备工作都有哪些?

来源:http://rubatube.com 日期:2020-02-19 发布人:admin 浏览次数:
在装修过程中,门是一个非常重要的选择和安装项目,越来越多的人选择当安装铁艺大门,不仅在外观更漂亮,还会有防盗的作用,也在市场上很受欢迎,越来越多的消费者,但这是需要做一些准备在施工之前,当使用通常的保养也是非常重要的。
  In the process of decoration, the door is a very important choice and installation project. More and more people choose to install the iron gate, which is not only more beautiful in appearance, but also has the function of anti-theft. It is also very popular in the market, more and more consumers, but it is necessary to make some preparations before construction, when using the usual maintenance is also very important.
  施工前准备:
  Preparation before construction:
  1. 制造的铁艺门进入时应出示出厂证明和检测报告,并检查其规格、型号、尺寸是否符合设计要求。
  1. When the manufactured iron door enters, it shall show the factory certificate and test report, and check whether its specification, model and size meet the design requirements.
  2、把窗码放到安全的地方,垫好木板,做好掩护。以免出错,否则以后与客户不良合作。
  2. Put the window code in a safe place, pad the board and cover. To avoid mistakes, or bad cooperation with customers in the future.
  3.按济南铁艺门位置线,按50cm水平线确定安装标高。
  3. The installation elevation shall be determined according to the location line of Jinan iron door and the horizontal line of 50cm.
  4. 打开、检查和运输门也很重要,因为我们不希望门在运输过程中被损坏。
  4. It is also important to open, inspect and transport the door because we do not want it to be damaged during transport.
  5,根据工程图纸质量检验规范和检验、铁艺配件,如发现缺少边角和崎岖的,错误过多,严重损害,外观偏大,应仔细协商,改造后,评估通过考试,能够安装,并检查,铁艺大门,与原来的电影,如果有破损应该填胶后再安装施工。
  5. According to the engineering drawing quality inspection specifications and inspection, iron accessories, if there is a lack of corners and bumps, too many errors, serious damage, and large appearance, it should be carefully negotiated. After the transformation, the evaluation passes the examination, and the iron gate can be installed and inspected. With the original film, if there is any damage, it should be filled with glue before installation and construction.
济南铁艺大门

  6. 准备好脚手架并采取防护措施。
  6. Prepare scaffold and take protective measures.
  维护方法:
  Maintenance method:
  1. 避免碰撞。这是消费者在选购时需要注重的一点,在处理过程中需要小心摆放,所应是硬东西不常碰到的地方。一旦选定了地点,就不应该经常改变。安装的墙面还应保持平整,使铁门安装平整,如晃动不稳,天会使铁门产生轻微变形,影响使用寿命。
  1. Avoid collision. This is a point that consumers need to pay attention to when purchasing. They need to place it carefully in the process of processing. It should be a place where hard things don't often encounter. Once the location is chosen, it should not be changed often. The installed wall surface should also be kept flat to make the iron door installation flat. If the shaking is not stable, the iron door will be slightly deformed, which will affect the service life.
  2. 清洁并清除灰尘。最好选择纯棉针织品作为布料,擦拭门面。
  2. Clean and remove dust. It's best to choose pure cotton knitwear as cloth and wipe the door surface.
  3.远离酸碱。如果门不小心沾上了酸碱,应立即用水清洗污垢,然后用干棉布擦干。
  3. Keep away from acid and alkali. If the door is accidentally stained with acid and alkali, immediately clean the dirt with water, and then dry it with dry cotton cloth.
  4. 远离太阳。太阳的照射会对大门产生间接的影响,长期下来会减损铁门的寿命。
  4. Keep away from the sun. The sun's radiation will have an indirect impact on the gate, which will reduce the life of the iron gate in the long run.
  5. 远离湿气。门最好安装在通风处,避免受潮。
  5. Keep away from moisture. The door should be installed in the ventilated place to avoid dampness.
  6. 除锈。如果生锈了,不能直接用砂纸打磨,锈迹小,可以用棉纱蘸上锈迹油,然后用棉布擦干。
  6. remove rust. If it is rusty, it can't be polished directly with sandpaper. If the rust is small, it can be dipped in rust oil with cotton yarn, and then dried with cotton cloth.
  以上就是济南铁艺大门施工前的准备的详细介绍,想要了解更多请点击官网http://rubatube.com
  The above is a detailed introduction to the preparations for the construction of Jinan iron gate. For more information, please click http://rubatube.com